| Input |
• Rated input voltage |
90÷264Vac |
|
• Line frequency |
50/60Hz |
|
• Power factor |
>0.98 typ. |
|
• Leakage current to GND (max) |
Max 1.5mA at 50Hz |
|
• Input protection |
• Start-up peak current limit. (30A 5msec typ.)• Fuses on both input lines and EMI filter |
|
• Input inhibit |
• TTL/CMOS comp. low active |
| Output |
• Output voltage |
See datasheet |
|
• Output voltage temp drift |
0.01%/°C typ. |
|
• Output voltage long term stability |
Better than 1% after 24 hours |
|
• Adjustable voltage range |
• Vadjust trimmer on front panel |
|
• Remote sense compensation |
0.5V max |
|
• Output power (max) |
1000/1200W typ. at 65°C |
|
• Hold up time |
40msec (90÷264Vin) |
|
• Start up time |
60msec typ. |
|
• Test points |
Vout test point on front panel |
|
• Output protections |
• Overload• Short circuit• Overvoltage : at Vo + 25% typ.• Over temperature, with thermal sensor |
| General Features |
• DC-DC / AC-DC |
AC - DC |
|
• Efficiency |
75÷85% typ.(depending on output voltage) |
|
• Dieletric withstand voltage |
• Input / P.E.: 2500Vac |
|
• Isolation |
• Output / P.E.: 2000Vac |
|
• See table for |
• Output voltages and currents• Line and load regulation• Output ripple and noise |
|
• Cooling |
Forced ventilation |
|
• Operating indicator |
• Led Line OK• Led Vout OK |
|
• Other features |
• Automatic load sharing control• Alarm: relay contact (isol. 2000V)Optional:• DD - Output decoupl. diode for parallelconnection |
|
• Operating temperature |
0°C to 65°C |
|
• Storage temperature |
"-20°C to 85°C" |
|
• Switching frequency |
100kHz ca. |
|
• Weight |
11000g |
|
• Comply with |
• EN 50081-1• EN 61000-6-2• EN 60950-1• EN 61000-3-2 Cl.A• CE |
|
• Dimensions |
Euro Rack 3HEx19"x272 mm |
|
• Application fiels |
Industrial application |